Effect of aging temperature and of retrogression treatment time on the microstructure and mechanical properties of alloy AA 7075 A Karaaslan, I Kaya, H Atapek Metal Science and Heat Treatment 49 (9), 443-447, 2007 | 57 | 2007 |
Ballistic Impact Behaviour of a Tempered Bainitic Steel Against 7.62 mm Armour Piercing Projectile. SH Atapek, S Karagoz Defence Science Journal 61 (1), 2011 | 53 | 2011 |
Influence of preform preheating on dry sliding wear behavior of 304 stainless steel reinforced A356 aluminum matrix composite produced by melt infiltration casting R Gecu, ŞH Atapek, A Karaaslan Tribology International 115, 608-618, 2017 | 37 | 2017 |
Development of a new armor steel and its ballistic performance SH Atapek Defence Science Journal 63 (3), 271-277, 2013 | 35 | 2013 |
Direct reduction of ferrous oxides to form an iron-rich alternative charge material Hİ Ünal, E Turgut, ŞH Atapek, A Alkan High Temperature Materials and Processes 34 (8), 751-756, 2015 | 26 | 2015 |
Microstructural and fractographical studies on quenched and tempered armor steels Ş Karagöz, ŞH Atapek, A Yilmaz Materials Testing 52 (5), 316-322, 2010 | 26 | 2010 |
Fractographical analysis of fatigue failed Cu–2.55 Ni–0.55 Si alloy ŞH Atapek, SG Pantelakis, Ş Polat, AN Chamos, G Aktaş Theoretical and Applied Fracture Mechanics 83, 60-66, 2016 | 22 | 2016 |
A Microstructural study on CuSn10 bronze produced by sand and investment casting techniques Z Taslicukur, GS Altug, Ş Polat, ŞH Atapek, E Turedi 21st International Conference on Metallurgy and Materials METAL, 23-25, 2012 | 22 | 2012 |
Zırh çeliklerinin fiziksel metalurjik esaslar doğrultusunda geliştirilmesi ve karakterizasyonu ŞH Atapek Kocaeli Üniversitesi, Fen Bilimleri Enstitüsü, 2006 | 21 | 2006 |
Structural and electrochemical characterization of Zn–TiO2 and Zn–WO3 nanocomposite coatings electrodeposited on St 37 steel Ü Erten, Hİ Ünal, S Zor, ŞH Atapek Journal of Applied Electrochemistry 45, 991-1003, 2015 | 19 | 2015 |
Modeling and thermal analysis of solidification in a low alloy steel Ş Hakan Atapek, E Erişir, S Gümüş Journal of thermal analysis and calorimetry 114, 179-183, 2013 | 18 | 2013 |
Metalik toz işleme teknolojisi ve prosesleme kademeleri açısından parametrik ilişkiler Ş KARAGÖZ, R YAMANOĞLU, ŞH ATAPEK Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi …, 2009 | 17 | 2009 |
Tribo-corrosion behavior of cast and selective laser melted Co-Cr alloy for dental applications ŞH Atapek, D Ts, G Aktaş, Ş Polat, D Dz, D Pavlova, M Simov Machines. Technologies. Materials. 10 (12), 61-64, 2016 | 16 | 2016 |
Effect of tempering temperature and microstructure on the corrosion behavior of a tempered steel ŞH Atapek, Ş Polat, S Zor Protection of Metals and Physical Chemistry of Surfaces 49, 240-246, 2013 | 16 | 2013 |
Fatigue behavior of precipitation strengthened Cu–Ni–Si alloy modified by Cr and Zr addition ŞH Atapek, S Pantelakis, Ş Polat, A Chamos, G Aktaş Çelik International Journal of Structural Integrity 11 (6), 861-873, 2020 | 15 | 2020 |
Zırh çeliklerinde perforasyon ve balistik korumanın anlaşılması açısından fragtografik etüd Ş Karagöz, ŞH Atapek, A Yılmaz Metal Dünyası 182, 102-107, 2008 | 15 | 2008 |
Thermal and microstructural characterization of a novel ductile cast iron modified by aluminum addition GA Çelik, MIT Tzini, Ş Polat, ŞH Atapek, GN Haidemenopoulos International Journal of Minerals, Metallurgy and Materials 27, 190-199, 2020 | 13 | 2020 |
Tribological characterization of cast and selective laser melted Co-Cr-Mo alloys under dry and wet conditions K Duran, H Mindivan, ŞH Atapek, M Simov, T Dikova Proceedings of the 19th International Metallurgy and Materials Congress IMMC …, 2018 | 12 | 2018 |
Microstructural and mechanical characterization of solidified austenitic stainless steels AG Celik, S Polat, SH Atapek, GN Haidemenopoulos Archives of Foundry Engineering 17, 2017 | 12 | 2017 |
Effect of cobalt on the aging kinetics and the properties of a CuCoNiBe alloy ŞH Atapek Materials Testing 57 (1), 17-21, 2015 | 12 | 2015 |