The microstructure of AlSi7Mg alloy in as cast condition B Dybowski, B Adamczyk-Cieślak, K Rodak, I Bednarczyk, A Kiełbus, ... Solid state phenomena 229, 3-10, 2015 | 14 | 2015 |
The Influence of alumInum on The mIcrosTrucTure and hardness of mg-5si-7sn alloy T Rzychoń, B Dybowski Archives of Metallurgy and Materials 61 (1), 425-432, 2016 | 12 | 2016 |
Microstructural phenomena occurring during early stages of cavitation erosion of Al-Si aluminium casting alloys B Dybowski, M Szala, A Kiełbus, T Hejwowski Solid State Phenomena 227, 255-258, 2015 | 12 | 2015 |
Introducing advanced data analytics in perspective of industry 4.0 in a die casting foundry M Perzyk, B Dybowski, J Kozłowski Archives of Foundry Engineering, 2019 | 9 | 2019 |
Influence of the chemical composition on electrical conductivity and mechanical properties of the hypoeutectic Al-Si-Mg alloys B Dybowski, J Szymszal, A Kiełbus Archives of Metallurgy and Materials 61 (1), 353--360, 2016 | 8 | 2016 |
Influence of age hardenIng parameters on the mIcrostructure and propertIes of the alsi7mg sand cast alloy Ł Poloczek, B Dybowski, K Rodak, R Jarosz, A Kiełbus Archives of Metallurgy and Materials 60, 2015 | 8 | 2015 |
The microstructure of elektron21 and WE43 magnesium casting alloys after subsequent melting process operations B Dybowski, A Kiełbus, R Jarosz, J Paśko Solid State Phenomena 211, 65-70, 2014 | 8 | 2014 |
The mechanisms of cavitation erosion of the Elektron21 magnesium alloy B Dybowski, M Szala, A Kiełbus, T Hejwowski Solid State Phenomena 229, 99-104, 2015 | 7 | 2015 |
WC-Co coatings and sinters modified with nano-sized TiC microstructure–quantitative evaluation H Myalska, B Dybowski, G Moskal Advances in Science and Technology. Research Journal 11 (1), 2017 | 6 | 2017 |
The porosity description in hypoeutectic Al-Si alloys B Dybowski, Ł Poloczek, A Kiełbus Key Engineering Materials 682, 83-90, 2016 | 6 | 2016 |
Influence of pouring temperature on castability and microstructure of QE22 and RZ5 magnesium casting alloys B Dybowski, R Jarosz, A Kiełbus, J Cwajna Solid State Phenomena 191, 137-144, 2012 | 6 | 2012 |
Mg--Bi--X (X= Ca, Mn, Zn) Alloys Microstructure in the As-Solidified Condition. A Gryc, M Godzierz, Ł Poloczek, B Dybowski, A Kiełbus Acta Physica Polonica, A. 135 (2), 2019 | 5 | 2019 |
Effect of mould components on the cooling rate, microstructure, and quality of WE43 magnesium casting alloy B Dybowski, A Kiełbus, R Jarosz Archives of Metallurgy and Materials 59 (4), 1527-1532, 2014 | 5 | 2014 |
Effects of die-casting defects on the blister formation in high-pressure die-casting aluminum structural components B Dybowski, A Kiełbus, Ł Poloczek Engineering Failure Analysis 150, 107223, 2023 | 4 | 2023 |
The Mg₂ Sn precipitation process in the Mg-7Sn alloys with the addition of silicon and aluminum T Rzychoń, B Dybowski Acta Physica Polonica A 130 (4), 1037-1040, 2016 | 4 | 2016 |
Influence of the wall thickness on castability and microstructure of the QE22 magnesium alloy Ł Poloczek, B Dybowski, R Jarosz, A Kiełbus Solid State Phenomena 229, 77-82, 2015 | 4 | 2015 |
Mechanical properties and microstructure of WE43 magnesium matrix composite reinforced SiC particles T Rzychoń, B Dybowski, A Gryc, M Dudek Archives of Foundry Engineering 15, 2015 | 4 | 2015 |
The influence of strontium on the microstructure of cast magnesium alloys containing aluminum and calcium T Rzychoń, B Dybowski, A Kiełbus Archives of Metallurgy and Materials 60 (1), 167--170, 2015 | 4 | 2015 |
Influence of mould cooling rate on the microstructure of AZ91 magnesium alloy castings S Roskosz, B Dybowski, R Jarosz Solid State Phenomena 191, 115-122, 2012 | 4 | 2012 |
The microstructure of WE43 MMC reinforced with SiC particles B Dybowski, T Rzychoń, B Chmiela, A Gryc Archives of Metallurgy and Materials 61 (1), 393--398, 2016 | 3 | 2016 |